Expert Answers about Dutchmen Kodiak Ultimate Travel Trailer

• Determining The Correct Baggage Slam Latch For A 2017 Dutchmen Kodiak Ultimate 288BHSL
• Manufacturers do not list the part numbers they use so we have no way of looking up the specific match but we can measure the cutout hole to determine the correct replacement. To do this you'll just need to remove the backing plate from the slam latch and measure the height and width of the hole. With that measurement we can fins a corresponding fit. For example, the Global Link RV Baggage Door Slam Latch # 295-000078 you were looking at has a recommended cutout hole of 3-7/8" wide...
  view full answer...


• Grease Seals for 2018 Dutchmen Kodiak Ultra Light Travel Trailer
• The Grease Seals # RG06-050 are the ones most likely to fit your 2018 Dutchmen Kodiak Travel Trailer. You can confirm this by removing the hubs ahead of time(This is recommended so that you can inspect the bearings to see if you will require those as well). You will generally be able to find the measurement stamped into the seal. If you are unable to read the measurement you can see the article linked below on how to measure for that seal as well as the bearings and races. When you...
  view full answer...


• Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
• We have it, the etrailer Hub and Drum # AKHD-655-35-EZ-K, listed out for a 3,500 lb axle (and we break the math down on the product page) but when it comes to the hub side of things it's more about making sure it physically fits so since the bearings and seal match what you have with your #84 spindle, this hub will safely work with your 4,400 lb axles.
  view full answer...